24V30A solar charge controller for solar power system

solar controller 1.12V or 12/24V auto work 2. For use with solar panels only... Application: Solar System Controller

    Solar controller

   For household PV Controller Main characteristics:

  1. From 12V/30A to48V/50A  2. Control power: from several watt to several kilowatt  3. Voltage level: 12V,24V,48V   4. Solar modules 2 groups input control.  5. Controlled by MCU microprocessor, Can meet any special demands on different occasions, it also can avoid surging due to start and shut down simultaneously of any groups.  6. Has a series of alarm and protective functions such as over-charge,over-discharge,over-load,short-circuit,reverse-connect,reverse-prevent at night and over-heat.   7.  Display battery capacity: LED show   8. Can be grounded with anode or cathode based on the demand of controller.  9. Has temperature compensation functions. 10. Hall current and voltage sensor. 11. Thunder-defend: according to demand of different systems, install SPD of different levels

Product model	Over discharge parameter (V)		Over voltage parameter (V)		Over charge parameter (V)		Light control on voltage  (V)	Light control off voltage  (V)	No load current(A)
	Over discharge protection	Over discharge resume	Over voltage protection	Over voltage resume	Average protection	Average resume
CQ12XX	11.1V±1%	13.2V±1%	16.5V±1%	15.0V±1%	14.4V±1%	13.3V±1%	2/	7/	≤1%
CQ24XX	22.2V±1%	26.4V±1%	33.0V±1%	30.0V±1%	28.8V±1%	26.6V±1%	4/	14/	≤1%
CQ48XX	44.4V±1%	52.8V±1%	66.0V±1%	60.0V±1%	57.6V±1%	53.2V±1%	8/	28/	≤1%

                  For solar street light               1.     From 12V/30A to48V/50A  2.  Control power: from several watt to several kilowatt  3.  Voltage level: 12V,24V,48V   4.  Solar modules 2 groups input control.  5.  Controlled by MCU microprocessor, Can meet any special demands on different occasions, it also can avoid surging due to start and shut down simultaneously of any groups.  6.  Has a series of alarm and protective functions such as over-charge,over-discharge,over-load,short-circuit,reverse-connect,reverse-prevent at night and over-heat.   7.  Display battery capacity and set time: LED show   8. Can be grounded with anode or cathode based on the demand of controller.  9. Has temperature compensation functions. 10. Hall current and voltage sensor. 11. Thunder-defend: according to demand of system, install SPD of different levels. 12.Automatically turn on by the PV panel voltage, can set the time freely from four minutes to fifteen hours . 13. can be set light turn on ---time turn off ---time turn on –light turn off

24V30A solar charge controller for solar power system